Anycubic PLA+ Filament 1kg

Enhanced toughness over standard PLA | Smooth, consistent extrusion | Eco-friendly plant-based material | Compatible with all 1.75 mm FDM printers | Beginner-friendly printing parameters

The Anycubic PLA+ Filament is a high-toughness 3D printing material suited to hobbyists, educators, and makers who want better structural results than standard PLA without added complexity. Formulated from premium raw materials, it delivers twice the toughness of ordinary PLA with a bending modulus of 3980±360 MPa, making it well suited to toys, decorative parts, and functional prints that need to withstand handling. A tight diameter tolerance of less than ±0.02 mm ensures consistent, even extrusion that minimises nozzle clogging and produces clean, smooth surfaces. Because it shares standard PLA printing parameters — nozzle temperatures of 190–230 °C, a heated bed of 55–65 °C, and print speeds of 50–200 mm/s — you can load a new spool and get reliable results straight away. Refined from an eco-friendly plant-based substance, it produces lower odour during printing and does not emit irritating fumes, keeping your workspace comfortable. Each 1 kg spool features a reusable design with a threaded connection system that reduces filament entanglement and tangling errors.

Features

Enhanced toughness with a bending modulus of 3980±360 MPa — approximately twice that of standard PLA — for more impact-resistant, durable prints

Tight diameter tolerance of less than ±0.02 mm for consistent extrusion and reduced nozzle clogging

Compatible with all 1.75 mm FDM printers; no special settings required

Eco-friendly plant-based material with lower odour and no irritating emissions during printing

Reusable spool with threaded connection system to minimise filament entanglement and operational errors

Supports intelligent identification chips for automatic filament recognition on compatible Anycubic printers (e.g. ACE Pro)

Recommended for toys, decorative parts, and fandom or creative projects

Specifications

Dry Out Before Use: Recommended

Drying Condition: 45-50℃, 6-8h

ACE Compatibility: Compatible

Nozzle Size: Recommended 0.2 mm or above

Printing Temperature: 190-230 ℃

Heated Bed Temperature: 55-65 ℃

Recommended Printing Speed: 50-200 mm/s

Cooling Time: 9 s

Maximum Volume Speed (Flow Rate): 12 mm³/s

Density: 1.21 g/cm³

Melt Index: 4~10 g/10 min (190℃/2.16kg)

Melting Point Temperature: 162 ℃

Heat Deflection Temperature (0.45MPa): 50 ℃

Young's Modulus: 2790±250 MPa

Tensile Strength: 45±5 MPa

Elongation at Break: 12±1%

Bending Modulus: 3980±360 MPa

Bending Strength: 82±8 MPa

lzod lmpact Strength (X-Y): 28±1 kJ/m²

Tensile Strength (Z): 23.8±0.4 MPa

Filament Type: General filaments

Recommend to Print: Toys, decorative parts, and fandom

Intelligent Identification: Supported

Reusable Filament Spool: Supported

What's in the Box